chrysler neon imobilizer

[don]

can i bypass imoby somehow, it doesnt have to look good.
96 2ltr neon don

[peterol1@live.co.uk]

HI my names Pete had same problem few weeks ago.Temporarily you can emergency bypass the immobiliser by leaving drivers door open,while seated in car turn ignition on fully.Next locate fuse no;3{central locking]pull out and jiggle it till light on dash goes out,you will now be able to fire up car.Whilst running take out fuse reinsert to start again bit of a pain to keep remembering but is effective.I have just fitted a{module interface]fancy language for by-passer, myself [simple]Tel no; of bloke that sells part is 0208 315 8309 M.B;07971 420682. Hope you get sorted.

[peterol1@live.co.uk]

can i bypass imoby somehow, it doesnt have to look good.
96 2ltr neon don PUT key on full ignition, leave drivers door open, take out fuse no;3{central locking one] jiggle fuse in fuse hole till light on dash goes out, now start car.Take fuse out on starting ,replace everytime you need to go again and so on,can get a bit tedious if you forget to take out .fuse and you have to start all over again but it works,recently just fitted a pernament solution by replacing ECU ,Tel;0208 315 8309 M,B07971420682.This bloke sells them.Good luck Pete.

[peterol1@live.co.uk]

look on forum